Panier
Il n'y a aucun article dans votre panier
22 cm Gyuto "ApexUltra"
A 22 cm gyuto with an ApexUltra blade and a desert ironwood handle Lire plus..
0
The geometry of this 22 cm gyuto is between a user friendly and a laser. The thinly ground tip tends towards the laser, while the coil is a little stronger. It has very high cutting abilities while at the same time having enough power reserves for worry-free work.
The knife is equally suitable for all cutting techniques.
The cutting edge of this knife consists of the special melt ApexUltra. This steel has a very good combination of wear resistance, cutting edge stability and suitability for finely ground cutting edges.
Of course, the blank was forged with optimal temperature control and forming and then subjected to extensive heat treatment (including deep-freeze treatment after hardening). This guarantees an optimally adjusted structure and extremely finely distributed carbides.
| Lenght of edge: |
226mm |
| Max. height of the blade: |
57mm |
|
Thickness of the blade: |
|
| Tang: |
7,8mm |
| Coil: |
4,3mm |
| Middle: |
2,6mm |
| 20mm before the tip: |
1,0mm |
| Lenght of the handle: |
120mm |
| Weight: |
295g |
| Balancepoint: |
25mm before the handle |
| Geometry: |
between userfriendly an laser |
| Flatspot: |
70mm |
| Core steel: |
C = 1,25 %
P <= 0,01 %
S <= 0,01 %
Si = 0,35 %
Mn = 0,30 %
Cr = 1,50 %
W = 2,60 %
V= 0,4%
66hrc
|
| Intermediate layer: |
nickel |
| Clad: |
1.2767 |
| Material of the handle: |
Desert ironwood |
| Shape of the handle: | western |