Panier
Il n'y a aucun article dans votre panier
22 cm Laser "125SC"
A 23cm laser with a 125SC blade and desert ironwood handle. Lire plus..
0
This 22 cm Gyuto is a classic laser. Low blade thickness, ground very thin and the blade flanks are only slightly convex. As a result, the blade is a very good performer, the food release is naturally less pronounced than with thicker and more convex blades. The tip is thin but not too thin and sensitively ground. The knife is equally suitable for all cutting techniques.
The blade is made from 125sc ultra high carbon steel on which I have performed several additional heat treatment steps (diffusion annealing, forging, normalizing, fine grain annealing, soft annealing). In order to exploit the full performance potential, the blade was subjected to a deep freeze treatment after hardening to reduce the residual austenite content.
The blade has been differentially hardened and shows a subtle hardening line (Hamon).
The handle is made of desert ironwood with a spacer made of blue stabilized popplar.
| Lenght of edge: |
220mm |
| Max. height of the blade: |
57mm |
|
Thickness of the blade: |
|
| Tang: |
2,7mm |
| Choil: |
2,6mm |
| Middle: |
2,5mm |
| 20mm before the tip: |
1,0mm |
| Lenght of the handle: |
126mm |
| Weight: |
186g |
| Balancepoint: |
25mm before the handle |
| Geometry: |
Laser |
| Flatspot: |
No flatspot |
| Steel: |
Approx. 66 hrc |
| Material of the handle: |
Desert ironwood, black fiber, blue stabilized popplar |
| Shape of the handle: |
Hakakku (octagonal) |