Panier
Il n'y a aucun article dans votre panier
22 cm Userfriendly "ApexUltra"
A 22 cm Userfriendly with an ApexUltra blade and a desert ironwood handle. Lire plus..
0
This 22cm Userfriendly has an ApexUltra cutting edge with 66 hrc. The blade has a strong taper, the front half of the blade tends towards a laser. The tip is ground very fine. The geometry is slightly convex, the grind becomes flatter and flatter towards the tip. Due to the fine tip, the knife must be used with appropriate care. The knife is equally suitable for all cutting techniques.
The handle is made of desert ironwood with a very nice grain and a puddle iron cap.
| Lenght of edge: |
224mm |
| Max. height of the blade: |
57mm |
|
Thickness of the blade: |
|
| Tang: |
5,1mm |
| Coil: |
4,4mm |
| Middle: |
2,6mm |
| 20mm before the tip: |
0,9mm |
| Lenght of the handle: |
121mm |
| Weight: |
250g |
| Balancepoint: |
22mm before the handle |
| Geometry: |
Between userfriendly and laser |
| Flatspot: |
no flatspot |
| Core steel: |
C = 1,25 %
P <= 0,01 %
S <= 0,01 %
Si = 0,35 %
Mn = 0,30 %
Cr = 1,50 %
W = 2,60 %
V= 0,4%
66hrc
|
| Intermediate layer: |
nickel |
| Clad: |
1.5634 |
| Material of the handle: |
Desert ironwood, puddle iron, titanium |
| Shape of the handle: | western |