Panier
Il n'y a aucun article dans votre panier
27cm Workhorse "1.2695"
0
The geometry of this 27cm gyuto corresponds to a workhorse with a strong taper. It has a high cutting ability in the front half of the blade, towards the throat the wedge effect increases significantly. The high blade weight also supports the cut.
This knife is suitable for all cutting techniques.
The blade consists of high-alloy steel 1.2695, which has a very high wear resistance and good rust resistance.
| Lenght of edge: |
275mm |
| Max. height of the blade: |
58mm |
|
Thickness of the blade: |
|
| Tang: |
4,6mm |
| Choil: |
4,4mm |
| Middle: |
3,0mm |
| 20mm before the tip: |
1,0mm |
| Lenght of the handle: |
141mm |
| Weight: |
280g |
| Balancepoint: |
40mm before the handle |
| Geometry: |
Workhorse |
| Flatspot: |
Approx. 100mm |
| Steel: |
62-63 hrc |
| Material of the handle: |
Black stabilized curly maple, green stabilized ash, blue fiber |
| Shape of the handle: |
Hakakku (octagonal) |