Panier
Il n'y a aucun article dans votre panier
25cm Gyuto "1.3505"
- Numéro de l'article:
- #109
- Heure de livraison:
- 0
A 25cm Userfriendly made of 1.3505 with a Thuja burl handle. Lire plus..
0
This 25cm Gyuto has a blade made of roller bearing steel 1.3505. The geometry corresponds to a user-friendly, very good performance but enough reserves for carefree work. The cutting edge is gently curved over the entire length. This makes the knife primarily suitable for rocking cuts and for push and pull cuts.
The handle is a fantastic piece of thuja burl with a grenadilla top plate.
As with all knives made by me, the blank is forged with optimal temperature control and forming from 60mm to 80mm thick starting material. This process creates a very fine-grained matrix and very small and finely divided carbides.
| Lenght of edge: |
251mm |
| Max. height of the blade: |
58mm |
|
Thickness of the blade: |
|
| Tang: |
4,6mm |
| Choil: |
4,0mm |
| Middle: |
2,5mm |
| 20mm before the tip: |
0,9mm |
| Lenght of the handle: |
116mm |
| Weight: |
225g |
| Balancepoint: |
35mm before the handle |
| Geometry: |
userfriendly |
| Flatspot: |
no flatspot |
| Steel: |
1.3505: Carbon: 1,0% Chromium: 1,5% Molybdenum: 0,1% Approx. 63 hrc |
| Material of the handle: |
Thuja burl, Grenadilla |
| Shape of the handle: |
Rounded top and bottom, flat on the sides |