Panier
Il n'y a aucun article dans votre panier
A 22 cm workhorse with an ApexUltra blade and grenadilla handle. Lire plus..
This mighty workhorse has a massive and heavy ApexUltra blade with a hardness of 66hrc. Nevertheless, it has a very good cutting ability and a finely ground tip. The blade has a moderate taper, the bevel angle becomes flatter towards the tip. As a result, the blade becomes more and more performant towards the tip. The high weight also supports the cut. The knife is suitable for all cutting techniques.
The grenadilla handle offers a sufficiently high counterweight so that the knife does not become too top-heavy. The handle is rounded off by a puddle iron cover plate, a reindeer horn spacer and a titanium pin.
Lenght of edge: |
222mm |
Max. height of the blade: |
54mm |
Thickness of the blade: |
|
Tang: |
5,0mm |
Coil: |
4,8mm |
Middle: |
4,0mm |
20mm before the tip: |
1,3mm |
Lenght of the handle: |
118mm |
Weight: |
265g |
Balancepoint: |
30mm before the handle |
Geometry: |
Workhorse |
Flatspot: |
Approx. 60mm |
Core steel: |
C = 1,25 %
P <= 0,01 %
S <= 0,01 %
Si = 0,35 %
Mn = 0,30 %
Cr = 1,50 %
W = 2,60 %
V= 0,4%
66hrc
|
Material of the handle: |
Grenadilla, reindeer antlers, puddle iron, titanium |
Shape of the handle: | Western |