€0,00
Ajouter au panier

23cm semi-integral Gyuto "Damascus San-Mai"

23cm semi-integral Gyuto "Damascus San-Mai"
€0,00
* Taxes incluses Sans les Frais d'expédition

A 23cm semi-integral Gyuto with a San-Mai blade with a core made of Apex Ultra and side layers made of Damascus steel. Lire plus..

0

This 23cm semi-integral gyuto has a blade with an Apex Ultra core. The sides are made of approximately 150 layers of damascus steel. The bolster is forged and embedded precisely into the handle wood.

The blade has a strong taper. On the choil it has a strong wedge effect and clearly leans towards workhorse. Towards the front, the blade becomes increasingly more cutting-edge and ends in a finely ground tip. The blade has a complex geometry in which both the crown and the bevel angle decrease towards the tip.

The knife is suitable for all cutting techniques.

The western handle is made of macassar ebony. A special feature is the tang, which goes completely through the handle and is riveted at the end with a decorative damask rivet.

A quick note. For all blades I make, including blades made of “mono steel”, the cutting steel is additionally refined. The only exception is the blades made of PM steel. For this purpose, the flat material is precisely ground flat and fire-welded in the absence of air. The blanks are forged from at least 60mm solid material. This results in a significantly more homogeneous distribution of the alloying elements. In combination with optimal heat treatment, this results in very small and evenly distributed carbides. Of course, all blades are subjected to a deep-freeze treatment after hardening to reduce the residual austenite content.

 

Lenght of edge:

235mm

Max. height of the blade:

56mm

Thickness of the blade:

 
Tang:

15,7mm

Coil:

6,3mm

Middle:

2,6mm

20mm before the tip:

0,9mm

Lenght of the handle:

117mm

Weight:

275g

Balancepoint:

Approx. 30mm before the handle

Geometry:

Light Workhorse

Flatspot:

Approx. 80mm

Core steel:

Apex Ultra

 
~66hrc
Intermediate layer:

Nickel

Clad:

Damascus steel made of:

1.2842

1.2003

1.5634

 

Material of the handle:

Makassar Ebony, Damascus steel

Shape of the handle:  Western
Veuillez accepter les cookies afin de rendre ce site plus fonctionnel. D'accord? Oui Non En savoir plus sur les témoins (cookies) »