Cart
You have no items in your shopping cart
21 cm Userfriendly "ApexUltra"
A 21 cm Userfriendly with an ApexUltra blade and Thuja-burl handle. Read more..
0
This 22 cm Userfriendly has a clearly pronounced taper. The cutting edge of this 3-layer blade consists of ApexUltra with a hardness of 66 hrc. Due to the high proportion of forged surface, the blade has a good food release. The tip of this knife is relatively low, which is why the knife is particularly suitable for pull and push cuts as well as chopping.
The octagonal handle consists of thuja with very nice burl growth. The tang goes through the entire handle and is riveted at the end to a puddle iron end plate. The plate is embedded in the handle.
| Lenght of edge: |
215mm |
| Max. height of the blade: |
57mm |
|
Thickness of the blade: |
|
| Tang: |
4,0mm |
| Coil: |
3,6mm |
| Middle: |
2,0mm |
| 20mm before the tip: |
1,4mm |
| Lenght of the handle: |
116mm |
| Weight: |
210g |
| Balancepoint: |
30mm before the handle |
| Geometry: |
Userfriendly |
| Flatspot: |
no Flatspot |
| Core steel: |
C = 1,25 %
P <= 0,01 %
S <= 0,01 %
Si = 0,35 %
Mn = 0,30 %
Cr = 1,50 %
W = 2,60 %
V= 0,4%
66hrc
|
| Intermediate layer: |
nickel |
| Clad: |
1.5634 |
| Material of the handle: |
thuja-burl, reindeer antlers, black fiber, puddle iron |
| Shape of the handle: | Hakakku (octagonal) |