Cart
You have no items in your shopping cart
23 cm Gyuto "ApexUltra"
A 23cm Gyuto with an ApexUltra blade and desert ironwood handle Read more..
0
The geometry of this 23 cm gyuto corresponds to a user friendly. It has a high cutting ability, at the same time it has enough power reserves for carefree work.
The knife is equally suitable for all cutting techniques.
The cutting edge of this knife consists of the special melt ApexUltra. This steel has a very good combination of wear resistance, cutting edge stability and suitability for finely ground cutting edges.
Of course, the blank was forged with optimal temperature control and forming and then subjected to extensive heat treatment (including deep-freeze treatment after hardening). This guarantees an optimally adjusted structure and extremely finely distributed carbides.
| Lenght of edge: |
230mm |
| Max. height of the blade: |
55mm |
|
Thickness of the blade: |
|
| Tang: |
5,2mm |
| Coil: |
4,0mm |
| Middle: |
3,0mm |
| 20mm before the tip: |
1,2mm |
| Lenght of the handle: |
128mm |
| Weight: |
275g |
| Balancepoint: |
30mm before the handle |
| Geometry: |
userfriendly |
| Flatspot: |
60mm |
| Core steel: |
C = 1,25 %
P <= 0,01 %
S <= 0,01 %
Si = 0,35 %
Mn = 0,30 %
Cr = 1,50 %
W = 2,60 %
V= 0,4%
66hrc
|
| Intermediate layer: |
nickel |
| Clad: |
1.2767 |
| Material of the handle: |
Desert ironwood, bronze, black fiber |
| Shape of the handle: | Rokakku-Hanmaru (upside angular,underside oval) |